Skip to content
The moody interior of a steel mill with heavy fabrication machinery
// SERVICES

Eight disciplines, one chain.

From the first cut to the final lift, DSG holds every step in-house — so quality, sequencing and accountability never cross a vendor boundary.

A metal fabrication workshop lit by showers of cutting sparks
01

01 — Clean profiles, zero rework

CNC Plasma & Laser Cutting

High-definition CNC plasma, fibre-laser and oxy-fuel cutting for plate and section. Nested for material yield, edge-prepped for welding, and dimensionally verified before anything leaves the cutting bay.

  • HD plasma up to 60 mm mild steel
  • Fibre laser for fine-tolerance thin gauge
  • Oxy-fuel for heavy plate & bevels
  • Automated nesting for material yield
  • Weld-ready edge preparation
PLASMA MAX
60 mm MS
LASER MAX
25 mm
BED SIZE
3000 × 12000 mm
TOLERANCE
± 0.5 mm
View Cutting in detail
The dark, gritty interior of a metal fabrication workshop
02

02 — Tight radii, repeatable bends

Bending, Forming & Rolling

CNC press-brake forming, plate rolling and section bending across a wide tonnage range. Programmed back-gauges and tooling libraries keep multi-bend parts consistent across the run.

  • CNC press brakes to 400 tonne
  • Plate rolling to 40 mm
  • Section & angle rolling
  • Multi-bend programmed back-gauge
  • Forming dies for repeat profiles
BRAKE FORCE
400 T
BRAKE BED
4000 mm
ROLL CAP
40 mm × 3 m
ANGLE
± 0.5°
View Forming in detail
A welder cutting and joining steel with a spray of bright sparks
03

03 — Qualified procedures, traceable welds

MIG / TIG / SMAW / FCAW Welding

Coded welding to AWS D1.1 and ISO 3834-2 across MIG, TIG, stick and flux-cored processes. Every joint runs to a qualified WPS, welded by certified welders, and logged for full traceability.

  • MIG / MAG (GMAW) for production volume
  • TIG (GTAW) for stainless & precision
  • SMAW & FCAW for heavy structural
  • Qualified WPS / PQR for every joint
  • Certified welders, weld-map traceability
CODES
AWS D1.1 / ISO 3834-2
PROCESSES
GMAW · GTAW · SMAW · FCAW
MATERIALS
CS · SS · Al
NDT
VT · MPI · UT · RT
View Welding in detail
A dark steel-mill interior filled with industrial machining equipment
04

04 — Precision where it counts

CNC Machining

CNC milling, turning and drilling for machined details, base plates, connections and bespoke components — finishing fabricated assemblies to fit-up tolerance.

  • CNC milling & turning
  • Drilling, tapping & boring
  • Machined base & connection plates
  • Bespoke component runs
  • Fit-up to assembly tolerance
MILL TRAVEL
2000 × 1000 mm
TURN Ø
600 mm
TOLERANCE
± 0.05 mm
BATCH
1 – 1000
View Machining in detail
Glowing molten metal in an industrial furnace during hot processing
05

05 — Protection that lasts decades

Surface Finishing & Coating

Abrasive blasting, hot-dip galvanizing, powder coating and industrial paint systems specified to the service environment — from C2 internal to C5-M marine, with DFT inspection on every batch.

  • Abrasive blast to Sa 2.5
  • Hot-dip galvanizing
  • Powder coating
  • Industrial paint systems to C5-M
  • DFT & adhesion inspection
BLAST
Sa 2.5
GALV
to IS 4759 / ASTM A123
SYSTEMS
C2 – C5-M
DFT
logged per batch
View Finishing in detail
Structural steel beams silhouetted against a dark sky
06

06 — Beams, columns, trusses, frames

Structural Steel Fabrication

Heavy and light structural steel — columns, beams, girders, trusses, bracing and complete building frames — fabricated to approved GA and shop drawings with full mill-cert traceability.

  • Columns, beams & girders
  • Trusses, purlins & bracing
  • Complete building frames
  • Built-up & plate girders
  • Mill-cert material traceability
MAX MEMBER
24 m
MONTHLY
1500 T
STANDARDS
IS 800 / AISC 360
TRACE
mill-cert to member
View Structural in detail
A dark perspective looking up through a precise industrial steel structure
07

07 — From concept to connection

Design & Engineering

In-house CAD, 3D modelling and connection design. We take your GA drawings to fabrication-ready shop details, with clash-checked models and an approval trail before steel is cut.

  • Structural detailing & shop drawings
  • 3D modelling (Tekla / Advance Steel)
  • Connection design & calculations
  • Clash detection & coordination
  • Approval & revision control
MODEL
Tekla / Advance Steel
DESIGN
IS 800 / Eurocode
OUTPUT
GA · shop · CNC/DSTV
BIM
LOD 350 – 400
View Design in detail
A structural steel truss being assembled, high-contrast against the sky
08

08 — We finish what we fabricate

Erection & Installation

Site erection by our own rigging crews — survey, setting-out, lifting, bolting, site welding and handover — closing the loop from drawing board to standing structure.

  • Method statements & lift plans
  • Survey & setting-out
  • Crane lifts & rigging
  • Site bolting & welding
  • Safety-led, on-time handover
CREWS
in-house rigging
LIFTS
to 200 T mobile
SAFETY
method-statement led
HANDOVER
as-built records
View Erection in detail
A molten metal pour throwing glowing orange sparks against a dark backdrop
START YOUR PROJECT

Have a drawing? Let's forge it.

Send us your drawings or a rough scope. We'll come back with a buildable quote, a programme, and a single point of contact.

Request a Quote
+91 93200 28553